The Crown 44 brand has had proven success for over 50 years in the North American market. Our Hardwood version of this panel is ideal for applications that require a smoother pouring surface and higher panel reusability than a softwood alternative.
Features & Benefits
Crown 44 Hardwood is constructed with high strength hardwood face and back veneer and Douglas fir inner plies. The high resin content MDO is applied in a one-step process. All adhesives used are fully waterproof phenolic resins that meet CSA exterior glue bond standards.
Available in 1220 x 2440 mm and 610 x 2440 mm in 17.5mm thickness
APA Structurally Certified
All of our Hardwood products are structurally certified by the APA and undergo rigorous inspection and testing by our Quality Control team.Hardwood Face and Back
A durable hardwood veneer is used for the face and back providing a smoother pouring surface and a more durable panel than our softwood options.Hi-Flow MDO Paper
Crown 44 panels come standard with our high resin content Hi-Flow MDO, providing a more durable working face than our standard matte MDO options.
Two Piece Inner Plies
Our two piece, Douglas fir inner ply construction method is engineered to provide a more solid panel that can better stand up to job site wear and tear.Multi-Layer Edge Protection
For additional moisture protection, all panels are edge puttied then coated with a silver, aluminized, resin-rich alkyd edge seal.Factory-Applied Release Agent
Crown 44 panels come factory coated with Nox-Crete Form Coating, a high quality, water-based, chemically active release agent.
Load-Span Tables
Allowable pressure (kN/m2) for the indicated deflection limits – 17.5 mm thickness – Wet Conditions
| Support Span (center to center) |
L/270 (kN/m2) |
L/360 (kN/m2) |
|---|---|---|
| 203 mm | 98 | 98 |
| 305 mm | 60 | 45 |
| 406 mm | 28 | 21 |
| 488 mm | 17 | 13 |
| 610 mm | 8.9 | 6.7 |
|
8′ Perpendicular to supports |
||
| Support Span (center to center) |
L/270 (kN/m2) |
L/360 (kN/m2) |
|---|---|---|
| 203 mm | 73 | 73 |
| 305 mm | 45 | 39 |
| 406 mm | 22 | 17 |
| 488 mm | 14 | 12 |
| 610 mm | 8.1 | 6 |
|
8′ Parallel to supports |
||
Note: Applicable for plywood across two or more spans, and on supports at least 1.5″ wide
Load Tables developed by APA: The Engineered Wood Association
Features & Benefits
Crown 44 Hardwood is constructed with high strength hardwood face and back veneer and Douglas fir inner plies. The high resin content MDO is applied in a one-step process. All adhesives used are fully waterproof phenolic resins that meet CSA exterior glue bond standards.
Available in 1220 x 2440 mm and 610 x 2440 mm in 17.5mm thickness
APA Structurally Certified
All of our Hardwood products are Structurally Certified by the APA and undergo rigorous inspection and testing by our Quality Control team.Hardwood Face and Back
A durable hardwood veneer is used for the face and back providing a smoother pouring surface and a more durable panel than our softwood options.Hi-Flow MDO Paper
Crown 44 panels come standard with our high resin content Hi-Flow MDO, providing a more durable working face than our standard matte MDO options.
Two Piece Inner Plies
Our two piece, Douglas fir inner ply construction method is engineered to provide a more solid panel that can better stand up to job site wear and tear.Multi-Layer Edge Protection
For additional moisture protection, all panels are edge puttied then coated with a silver, aluminized, resin-rich alkyd edge seal.Factory-Applied Release Agent
Crown 44 panels come factory coated with Nox-Crete Form Coating, a high quality, water-based, chemically active release agent.
Load-Span Tables
Allowable pressure (kN/m2) for the indicated deflection limits – 17.5 mm thickness – Wet Conditions
| Support Span (center to center) |
L/270 (kN/m2) |
L/360 (kN/m2) |
|---|---|---|
| 203 mm | 98 | 98 |
| 305 mm | 60 | 45 |
| 406 mm | 28 | 21 |
| 488 mm | 17 | 13 |
| 610 mm | 8.9 | 6.7 |
|
8′ Perpendicular to supports |
||
| Support Span (center to center) |
L/270 (kN/m2) |
L/360 (kN/m2) |
|---|---|---|
| 203 mm | 73 | 73 |
| 305 mm | 45 | 39 |
| 406 mm | 22 | 17 |
| 488 mm | 14 | 12 |
| 610 mm | 8.1 | 6 |
|
8′ Parallel to supports |
||
Note: Applicable for plywood across two or more spans, and on supports at least 1.5″ wide
Load Tables developed by APA: The Engineered Wood Association
Download the brochure
Need to take this information with you? Click to download the PDF version.
